Electronics Design & Development

Altium Designer V17, Cadence PCB Router V17.2, Gerbtool V16.8, AutoCAD 2017, NI Multisim and more..........

Electronics Design & Development

AGS-Engineering can provide a complete turnkey engineering and manufacturing solution. No matter what your quantities, we can design, develop and produce everything you need and deliver a fully functioning product right to your door.

  • All types of electronic hardware design; analog, digital and RF

  • Schematic capture

  • PCB Design

  • BOM creation

  • Firmware development

  • Test Fixture Development

  • PC software development

  • Mechanical Enclosure Building and Assembly

  • Prototype building

  • Bench testing and debug

  • 100% EOL Testing

  • X-ray Inspection

  • Supply Chain Management

  • Full turnkey production of finished product

 

No matter how complex your idea, we can design it!

From DSP's to FPGA's to RF communications AGS-Engineering can do it all.

Contact us today to see how we can help you.

  • Full turnkey electronic engineering for commercial and consumer applications

  • RF circuit design for communications

  • PCB Antenna design

  • Analog circuit design

  • Digital circuit design

  • DSP design & FPGA design

  • Software development - PC

  • Firmware development - Embedded

  • Professional technical documentation for manuals or training

  • Design Simulation

 

We can simulate your design before going to PCB layout to make sure it will work as expected.

  • Analog simulation

  • Digital simulation

  • RF Simulation

 

Some CAD tools we use are:

 

  • Altium Designer V17

  • Cadence Allegro V17.2

  • Cadence PCB Router V17.2

  • Cadence Capture CIS

  • PADS Layout 10.2

  • PADS Logic 10.2

  • PADS Blaze Router 10.2

  • DX Designer 050

  • OrCAD Capture CIS

  • Gerbtool V16.8

  • AutoCAD 2017

  • PSpice

  • NI Multisim

  • Sonnet V15 EM Simulator

  • MPLAB X from Microchip

  • Mentor HyperLynx

PCB & PCBA DESIGN AND DEVELOPMENT

A printed circuit board, or briefly denoted as PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, tracks, or traces, etched commonly from copper sheets laminated onto a non-conductive substrate. A PCB populated with electronic components is a printed circuit assembly (PCA), also known as a printed circuit board assembly (PCBA). The term PCB is often used informally for both bare and assembled boards. PCBs are sometimes single sided (meaning they have one conductive layer), sometimes double sided (meaning they have two conductive layers) and sometimes they come as multi-layer structures (with outer and inner layers of conductive paths). To be more explicit, in these multi-layer printed circuit boards, multiple layers of material are laminated together. PCBs are inexpensive, and can be highly reliable. They require much more layout effort and higher initial cost than either wire-wrapped or point-to-point constructed circuits, but are much cheaper and faster for high-volume production. Much of the electronics industry's PCB design, assembly, and quality control needs are set by standards that are published by the IPC organization.

We have engineers specialized in PCB & PCBA design & development and testing. If you have a project you would like us to evaluate, contact us. We will take into consideration available space in your electronic system and use the most suitable EDA (Electronic Design Automation) tools available to create the schematic capture. Our experienced designers will place the components and heat sinks in the most suitable locations on your PCB. We can either create board from schematic and then create the GERBER FILES for you or we can use your Gerber files to manufacture the PCB boards and verify their operation. We are flexible, so depending on what you have available and what you need done by us, we will do it accordingly. As some manufacturers require it, we create the Excellon file format too for specifying drill holes. Some of the EDA tools we use are:

  • EAGLE PCB design software

  • KiCad

  • Protel

 

AGS-Engineering has the tools and knowledge to design your PCB no matter how large or small.

We use the industry’s top tier design tools and are driven to be the best.

  • HDI Designs with micro vias and advanced materials - Via-in-Pad, laser micro vias.

  • High speed, multi layer digital PCB designs - Bus routing, differential pairs, matched lengths.

  • PCB Designs for space, military, medical and commercial applications

  • Extensive RF and analog design experience (printed antennas, guard rings , RF shields...)

  • Signal integrity issues to meet your digital design needs (tuned traces, diff pairs...)

  • PCB Layer management for signal integrity and impedance control

  • DDR2, DDR3, DDR4, SAS and differential pair routing expertise

  • High density SMT designs (BGA, uBGA, PCI, PCIE, CPCI...)

  • Flex PCB designs of all types

  • Low level analog PCB designs for metering

  • Ultra low EMI designs for MRI applications

  • Complete assembly drawings

  • In-Circuit Test data generation (ICT)

  • Drill, panel and cutout drawings designed

  • Professional fabrication documents created

  • Autorouting for dense PCB designs

 

Other examples of PCB & PCA related services we offer are

  • ODB++ Valor review for a complete DFT / DFT design verification.

  • Full DFM review for manufacturing

  • Full DFT review for testing

  • Part database management

  • Component replacement and substitution

  • Signal integrity analysis

 

If you are not yet at the PCB & PCBA design phase, but need the schematics of the electronic circuits, we are here to help you. See our other menus such as analog and digital design to learn more about what we can do for you. So, if you need the schematics first, we can prepare them and then transfer your schematic diagram into a drawing of your printed circuit board and subsequently create the Gerber files.

If you would like to explore our manufacturing capabilities along with our engineering capabilities, we recommend you to visit our custom manufacturing site http://www.agstech.net where you will also find details of our PCB & PCBA prototyping and manufacturing capabilities.

AGS-ENGINEERING

Fax: (505) 814-5778 (USA)

Physical Address: 6565 Americas Parkway NE, Suite 200, Albuquerque, NM 87110, USA

Mailing Address: PO Box 4457, Albuquerque, NM 87196 USA

  • Blogger Social Icon
  • Google+ Social Icon
  • YouTube Social  Icon
  • Stumbleupon
  • Flickr Social Icon
  • Tumblr Social Icon
  • Facebook Social Icon
  • Pinterest Social Icon
  • LinkedIn Social Icon
  • Twitter Social Icon
  • Instagram Social Icon

©2018 BY AGS-ENGINEERING

If you would like to offer us engineering services, please visit http://www.agsoutsourcing.com and fill out the ONLINE SUPPLIER APPLICATION FORM.

WhatsApp: Chat & Share media file for easy communication (505) 550-6501 (USA)