AGS-Engineering na-enye ọrụ nkwado injinia maka mmepe nke prototypes, samples, mock-ups, prototype assemblies, demos. Alaka ụlọ ọrụ anyị na-emepụta AGS-TECH, Inc.http://www.agstech.net) na-arụpụta ụdịdị gị ma ọ bụrụ na ịchọrọ ka emebere ya ma bugara gị ya. Agbanyeghị, ọ bụrụ naanị na ịchọrọ ka anyị chepụta ma mepụta prototype, nke ahụ bụ nke a na-anabata kpamkpam. E wezụga nka nka, mmepe na n'ichepụta nke prototypes, anyị na-enyekwa dị iche iche isi ọrụ metụtara prototype nkwado na ọhụrụ ngwaahịa mmepe. Nchịkọta nkenke nke isi ọrụ anyị na nkwado prototype bụ:

​

• Nkwalite echiche & mkpata ụbụrụ

• Nyocha mbụ (teknụzụ na/ma ọ bụ azụmahịa dị ka ịchọrọ)

• Nyochaa na mmesi obi ike nke ụkpụrụ & ụkpụrụ

• Nchọ patent & Ngwa patent

• Nyocha ahịa & Ntụle Uru & Atụmatụ ọnụ ahịa

• Ịhazi ọrụ nhazi na nkwadebe nke drafts, atụmatụ na nkọwa

• Eserese 2D ma ọ bụ 3D maka nkọwapụta mbido mbụ, data nyocha 3D

• Nhazi Eletriki & Eletrọnịkị

• Akụrụngwa Schematics

• Ụzọ na mgbagwoju akụkụ nomenclature

• Ntụle Element Izu (FEA)

• Nhazi maka nrụpụta (DFM)

• Usoro ịme anwansị dị iche iche, Ngwunye ọnụọgụgụ

• Nhọrọ nke Off-Shelf na Ngwa Emere na Ngwa

• Ịnagide (GD&T)

• 3D Printing Iji dị iche iche Ngwa na akụrụngwa & Mgbakwunye Mmepụta

• Prototyping ngwa ngwa site na iji ngwa na ngwa dị iche iche

• Ịkpụpụta mpempe akwụkwọ ngwa ngwa

• Nrụpụta ngwa ngwa, Mpụpụ, Nkedo, Ịkọwa

• Ịkpụzi ngwa ngwa site n'iji Akpụkpọ anụ dị ọnụ ala Mere nke Aluminom

• Mgbakọ ngwa ngwa

• Nnwale (usoro ọkọlọtọ na mmepe ule omenala)

​

Ọ ga-amasị anyị igosi ụfọdụ isi usoro eji na mgbakwunye na mmepụta ngwa ngwa, mmepe prototype, ka ị nwee ike ịme mkpebi ka mma. N'afọ ndị na-adịbeghị anya, enweela mmụba n'ọchịchọ maka nrụpụta ngwa ngwa na imepụta ngwa ngwa. Enwere ike ịkpọ usoro ndị a dị ka nrụpụta Desktọpụ ma ọ bụ imepụta ụdị efu. N'ụzọ bụ isi, a na-eme ụdị anụ ahụ siri ike nke akụkụ ozugbo site na eserese CAD akụkụ atọ. Okwu mgbakwunye Manufacturing a na-eji maka usoro ebe anyị na-ewu akụkụ na n'ígwé. N'iji ngwaike na ngwanrọ na kọmputa agbakwunyere anyị na-arụ nrụpụta mgbakwunye. Usoro prototyping na nrụpụta ngwa ngwa anyị kacha ewu ewu bụ:

 

• STEREOLITHOGRAPHY

• POLYJET

• IHE NKE NKE NKWUKWU

• ahọpụtara Laser SINTERING

• ELECTRON BEAM agbaze

• Mbipụta akụkụ atọ

• Ịmepụta ozugbo

• Ngwa ngwa ngwa.

 

Anyị na-akwado ka ị pịa ebe a kaBudata ihe atụ atụmatụ atụmatụ nke nrụpụta mgbakwunye yana usoro nrụpụta ngwa ngwa.nke AGS-TECH Inc. Nke a ga-enyere gị aka ịghọta ozi anyị na-enye gị n'okpuru.

 

Prototyping ngwa ngwa na-enye anyị uru ndị a:

 

1. A na-elele atụmatụ ngwaahịa echiche site n'akụkụ dị iche iche na nyocha site na iji sistemụ 3D / CAD.

2. A na-arụpụtapụta ma mụọ ihe nlere sitere na ihe ndị na-abụghị ọla na igwe sitere na akụkụ arụ ọrụ, teknụzụ na ihe ịchọ mma.

3. A na-emepụta prototyping dị ọnụ ala n'ime obere oge. Mgbakwunye mmepụta nwere ike iyi ka owuwu nke ogbe achịcha site stacking na bonding onye Mpekere n'elu nke ọ bụla ọzọ. N'ikwu ya n'ụzọ ọzọ, a na-emepụta ngwaahịa ahụ site na ibebe, ma ọ bụ oyi akwa site na oyi akwa na-etinye n'elu ibe ya. Enwere ike imepụta ọtụtụ akụkụ n'ime awa. Usoro dị mma ma ọ bụrụ na akụkụ dị mkpa ngwa ngwa ma ọ bụ ma ọ bụrụ na ọnụ ọgụgụ dị mkpa dị ala ma na-eme ka ọkpụkpụ na ngwá ọrụ dị oke ọnụ ma na-ewe oge. Agbanyeghị, ọnụ ahịa otu akụkụ dị oke ọnụ n'ihi akụrụngwa dị oke ọnụ.

 

Isi usoro nyocha ngwa ngwa ejiri bụ:

 

• STEREOLITHOGRAPHY: Usoro a na-abreviated dị ka STL, dabeere na ọgwụgwọ na hardening nke mmiri mmiri photopolymer n'ime a kpọmkwem udi site na-elekwasị anya a laser doo na ya. Laser polymerizes photopolymer na-agwọ ya. Site n'inyocha ụzarị laser UV dị ka a na-eme atụmatụ n'akụkụ elu nke ngwakọta fotopolymer, a na-emepụta akụkụ ahụ site na ala n'elu n'otu n'otu n'otu n'otu na-ekpo ọkụ n'elu ibe ya. A na-emegharị nyocha nke ntụpọ laser ugboro ugboro iji nweta geometrices emebere n'ime usoro ahụ. Mgbe emechara akụkụ ahụ kpamkpam, a na-ewepụ ya na ikpo okwu, kpochapu ma kpochaa ultrasonically na mmanya na-aba n'anya. Na-esote, a na-ekpughe ya na irradiation UV maka awa ole na ole iji jide n'aka na a na-agwọta polymer zuru oke ma sie ike. Iji chịkọta usoro ahụ, a na-achịkwa ikpo okwu nke a na-etinye n'ime ngwakọta fotopolymer na eriri laser UV ma na-ebugharị site na usoro nchịkwa servo dị ka tp ọdịdị nke akụkụ a chọrọ na akụkụ ahụ na-enweta site na foto nke oyi akwa polymer site na oyi akwa. A na-ekpebi akụkụ kachasị elu nke akụkụ a na-emepụta site na akụrụngwa stereolithography.

 

 

• POLYJET: Dị ka mbipụta inkjet, na polyjet anyị nwere isi mbipụta asatọ nke na-etinye fotopolymer na tray ụlọ. Ìhè ultraviolet etinyere n'akụkụ ụgbọ elu ndị ahụ na-agwọta ozugbo ma mee ka oyi akwa ọ bụla sie ike. A na-eji ihe abụọ eme ihe na polyjet. Ihe mbụ bụ maka ịmepụta ihe nlereanya n'ezie. Ihe nke abụọ, a na-eji resin dị ka gel mee ihe maka nkwado. A na-edobe ihe abụọ a oyi akwa site na oyi akwa ma gwọọ otu oge. Mgbe emechara ihe nlereanya ahụ, a na-ewepụ ihe nkwado ahụ na ngwọta mmiri. Resins eji eme ihe yiri stereolithography (STL). Polyjet nwere uru ndị a karịa stereolithography: 1.) Ọ dịghị mkpa maka ihicha akụkụ. 2.) Ọ dịghị mkpa maka postprocess ọgwụgwọ 3.) Obere oyi akwa ọkpụrụkpụ ga-ekwe omume na otú anyị na-mma mkpebi na ike rụpụta finer akụkụ.

 

 

• NKWUKWU NKE NKWUKWU: N'ịbụ nke e debiri dị ka FDM, usoro a na-eji isi extruder na-achịkwa robot nke na-aga n'akụkụ ụkpụrụ abụọ n'elu tebụl. A na-ewetu eriri ahụ wee bulie ya ka ọ dị mkpa. Site na orifice nke anwụ na-ekpo ọkụ n'isi, a na-ewepụ filament thermoplastic ma na-etinye ihe mbụ oyi akwa na ntọala ụfụfụ. A na-eme nke a site n'isi extruder nke na-eso ụzọ a kara aka. Mgbe oyi akwa mbụ ahụ gasịrị, a na-agbadata okpokoro ma na-etinye akwa ndị na-esote n'elu ibe ha. Mgbe ụfọdụ mgbe ị na-emepụta akụkụ dị mgbagwoju anya, a na-achọ ụlọ nkwado ka ntinye wee gaa n'ihu n'akụkụ ụfọdụ. N'okwu ndị a, a na-ewepụ ihe nkwado na obere oghere nke filament na oyi akwa nke mere na ọ dị ike karịa ihe nlereanya. Enwere ike mechaa gbazee ma ọ bụ gbajie ụlọ nkwado ndị a ka emechara akụkụ ahụ. The extruder anwụ akụkụ na-ekpebi ọkpụrụkpụ nke extruded n'ígwé. Usoro FDM na-ewepụta akụkụ nwere elu steepụ n'elu ụgbọ elu mpụta a ma ama. Ọ bụrụ na enweghị ike ịnakwere isi ike a, enwere ike iji polishing vapor kemịkalụ ma ọ bụ ngwa na-ekpo ọkụ mee ka ihe ndị a dị nro. Ọbụna wax na-egbuke egbuke dị ka ihe mkpuchi iji kpochapụ usoro ndị a ma nweta nkwado geometric ezi uche dị na ya.

 

 

• ahọpụtara Laser SINTERING: N'ịbụ nke e debiri dị ka SLS, usoro a na-adabere n'itinye polymer, seramiiki ma ọ bụ ntụ ntụ na-ahọrọ n'ime ihe. Ala nke ụlọ nhazi ahụ nwere cylinders abụọ: akụkụ-ewu cylinder na ntụ ntụ ntụ ntụ. A na-eweda nke mbụ n'otu n'otu na ebe a na-emepụta akụkụ nke sintered na nke ikpeazụ na-ebuli elu iji nye ntụ ntụ na akụkụ-ewu cylinder site na usoro rola. Nke mbụ, a na-edobe ntụ ntụ dị mkpa na akụkụ-ewu cylinder, mgbe ahụ, a na-etinye eriri laser na oyi akwa ahụ, na-achọpụta ma na-agbaze / sintering otu akụkụ obe, nke na-emeziwanye n'ime ihe siri ike. Uzuzu dị na mpaghara nke ọkụ laser na-adịghị kụrụ na-anọgide na-atọ ụtọ mana ọ ka na-akwado akụkụ ahụ siri ike. Mgbe ahụ, a na-edobe oyi akwa ọzọ nke ntụ ntụ ma meeghachi usoro ahụ ugboro ugboro iji nweta akụkụ ahụ. Na njedebe, a na-ewepụ ihe ndị na-adịghị ahụkebe ntụ ntụ. A na-eme ihe ndị a niile site na kọmpụta na-achịkwa usoro site na iji ntuziaka sitere na mmemme CAD 3D nke akụkụ a na-arụpụta. Enwere ike idobe ihe dị iche iche dị ka polymers (ABS, PVC, polyester… wdg), wax, ọla na ceramik nwere ihe eji emepụta polymer kwesịrị ekwesị.

 

 

• ELECTRON-BEAM agbaze: Yiri nhọrọ laser sintering, mana iji eletrọn beam agbaze titanium ma ọ bụ cobalt chrome powders iji mee prototypes na agụụ. Emeela ụfọdụ mmepe iji mee usoro a na igwe anaghị agba nchara, aluminom na ọla kọpa. Ọ bụrụ na ike ike ọgwụgwụ nke akụkụ ndị a na-emepụta chọrọ ka ọ dịkwuo elu, anyị na-eji ikpo ọkụ isostatic dị ọkụ na-esote akụkụ mmepụta dị ka usoro nke abụọ.

 

 

• Mbipụta akụkụ atọ: 3DP gosikwara ya, na usoro a, isi ebipụta na-edobe ihe nkedo inorganic n'elu oyi akwa nke enweghị ọla ma ọ bụ ntụ ntụ. A na-ewetu piston na-ebu ihe ndina ntụ ntụ ma na n'ọkwa ọ bụla, a na-edobe ihe nkedo ahụ n'owe oyibo ma jikọta ya na ihe nkedo. A na-eji ihe ntụ ntụ eme ihe bụ ngwakọta polymers na fibers, ájá ahịhịa, ọla. N'iji isi ihe dị iche iche n'otu oge na agba agba dị iche iche anyị nwere ike nweta agba dị iche iche. Usoro a yiri mbipụta inkjet mana kama inweta mpempe akwụkwọ nwere agba anyị na-enweta ihe nwere agba atọ. Akụkụ ndị a na-emepụta nwere ike ịbụ oghere na ya mere ọ nwere ike ịchọ nkwụsịtụ na ntinye ígwè iji mee ka njupụta na ike dịkwuo elu. Sintering ga-agbapụ ihe nkedo ahụ ma jikọta ntụ ntụ ígwè ọnụ. Ọla ndị dị otú ahụ a igwe anaghị agba nchara, aluminum, titanium nwere ike iji mee akụkụ na dị ka infiltration ihe anyị na-ejikarị ọla kọpa na ọla kọpa. Mma nke usoro a bụ na ọbụna mgbakọ mgbagwoju anya na nke na-agagharị agagharị nwere ike ịmepụta ngwa ngwa. Dịka ọmụmaatụ mgbakọ gia, ihe mgbanaka dị ka ngwá ọrụ nwere ike ịme ma nwee akụkụ ndị na-emegharị emegharị na ntụgharị dị njikere iji. Enwere ike ịmepụta ihe dị iche iche nke mgbakọ na agba dị iche iche na otu oge.

 

 

• Nrụpụta ozugbo na ngwa ngwa ngwa ngwa: E wezụga imewe nwale, nchọpụta nsogbu anyị na-eji ngwa ngwa prototyping maka kpọmkwem mmepụta nke ngwaahịa ma ọ bụ kpọmkwem ngwa n'ime ngwaahịa. N'ikwu ya n'ụzọ ọzọ, enwere ike itinye prototyping ngwa ngwa n'ime usoro omenala iji mee ka ha ka mma na asọmpi. Dịka ọmụmaatụ, prototyping ngwa ngwa nwere ike ịmepụta ụkpụrụ na ebu. Enwere ike ikpokọta ụkpụrụ nke polymer na-agbaze ma na-ere ọkụ nke arụ ọrụ nlegharị anya ngwa ngwa mepụtara maka ntinye ego na itinye ego. Ihe atụ ọzọ a ga-ekwu maka ya bụ iji 3DP mepụta shei nkedo seramiiki wee jiri nke ahụ rụọ ọrụ nkedo shei. Ọbụlagodi ịgba ntụtụ na ntinye ebu nwere ike imepụta site na ngwa ngwa prototyping na mmadụ nwere ike ịchekwa ọtụtụ izu ma ọ bụ ọnwa nke ebu na-eme oge ndu. Site n'ịtụle faịlụ CAD nke akụkụ achọrọ, anyị nwere ike ịmepụta geometry ngwá ọrụ site na iji ngwanrọ. Nke a bụ ụfọdụ ụzọ ngwa ngwa ngwa ngwa anyị na-ewu ewu:

 

• RTV (Ụlọ-Okpomọkụ Vulcanizing) MGBE / URETHANE CASTING : Iji ngwa ngwa prototyping nwere ike iji mee ụkpụrụ nke akụkụ achọrọ. Mgbe ahụ, a na-ekpuchi ụkpụrụ a na onye na-ekewapụ ma na-awụsa rọba RTV mmiri n'elu ụkpụrụ ahụ iji mepụta halves. Na-esote, a na-eji halves a na-akpụ akpụ a na-agbaba mmiri mmiri urethane. Ndụ ebu dị mkpụmkpụ, naanị dịka okirikiri 1 ma ọ bụ 30 mana ezuru maka imepụta obere ogbe.

 

• ACES (Acetal Clear Epoxy Solid) INJECTION MOLDING: Iji usoro prototyping ngwa ngwa dị ka stereolithography, anyị na-emepụta ihe ntụtụ. Ihe a na-akpụ akpụ bụ shells nwere oghere mepere emepe iji mee ka ejuputa ihe dị ka epoxy, epoxy nke aluminom ma ọ bụ ọla. Ndụ ebu ọzọ bụ naanị iri iri ma ọ bụ karịa ọtụtụ narị akụkụ.

 

• Usoro ihe eji eme igwe na-efesa: Anyị na-eji ngwa ngwa prototyping na-eme ụkpụrụ. Anyị na-efesa alloy zinc-aluminom n'elu ụkpụrụ ma kpuchie ya. A na-etinye ụkpụrụ ahụ nwere mkpuchi ọla n'ime flask ma were epoxy epoxy ma ọ bụ aluminom jupụtara. N'ikpeazụ, a na-ewepụ ya ma site n'ịmepụta halves abụọ dị otú ahụ, anyị na-enweta ọkpụkpụ zuru ezu maka ịkpụzi injection. Ụdị ndị a nwere ogologo ndụ ogologo oge, n'ọnọdụ ụfọdụ dabere na ihe onwunwe na okpomọkụ ha nwere ike ịmepụta akụkụ na puku kwuru puku.

 

• Usoro KEELTOOL: Usoro a nwere ike imepụta ihe ndị nwere ndụ okirikiri nde 100,000 ruo 10. Iji prototyping ngwa ngwa anyị na-emepụta ihe RTV. The ebu na-esote jupụta ngwakọta nke mejupụtara A6 ngwá ọrụ ígwè ntụ ntụ, tungsten carbide, polymer ihe nkedo na ka gwọọ. A na-ekpo ọkụ n'ụdị a iji mee ka polymer gbanyụọ ma mee ka ntụ ntụ dị n'ígwè gwakọta. Nzọụkwụ ọzọ bụ ntinye ọla kọpa iji mepụta ebu ikpeazụ. Ọ bụrụ na ọ dị mkpa, enwere ike ịrụ ọrụ nke abụọ dị ka machining na polishing n'ụdị ahụ maka izi ezi akụkụ ka mma.